| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
USE
HZD series automatic lifting hopper mixing machine can automatically
finish the whole process of clipping, lifting, mixing, falling and etc..
Equipped with an automatic hopper mixing machine and some different
standards mixing hopper, pharmaceutical enterprises can satisfy with
the demands of a great deal of output. it is a desirable mixing equipment
of pharmaceutical enterprises. |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
WORKING
PRINCIPLE
HZD series automatic lifting hopper mixing machine consists of shelf,
rotary, driving system, lifting system, |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
restraining system
and PLC control system. To begin to work, put the mixing hopper into the
rotary, and press the key of ENTER. The hopper is lifted to the required
height and clamped. Then driving system will begin to work and mix according
to the required time and speed when the pressing inductive machine receives
the signal. Reaching the required extent. the rotary will stop working.
Meanwhile, the restraining system starts working, the process of mix is
over. Then the lifting system begins to work, the mixing hopper of rotary
falls down and stops at the stated height. Pull the mixing hopper out,
the mixing cycle is finished and PLC will type the entire data of the
mixing process. The structure features of HZD series automatic lifting
hopper mixing machine is that the rotary and axis make of an angle, the
materials in mixing hopper turns by the rotary. Meanwhile, they make an
tangent movement along the wall of hopper. That reaches the perfect mixing
effect. |
|
|
| |
FEATURES
- HZD series automatic lifting hopper
mixing machine is a brand-new successfully developed type by our company
widely researching, absorbing and digesting foreign updated models.
it has compact structure, steady performance, and is convenient to
operate.
- This machine can clamp mixing hopper
with different standards and volume.
- Muti-usage can satisfy with all kinds
and a great deal of product.
- There is no dead angle, no convavo-convex
face and no screw on surface. All of the angles of mixing hopper are
cambered. The surface outside and inside are all polished. The rough
degree of surface inside is Ra<=0.2üm,and the rough degree
of surface outside is Ra<=0.4üm.The hermetic equipment of
hopper cover is made of silicon and latex. it is easy to clean.
- The even extent of mix reaches to 99%.
The charging modulus reaches to 50-80%.
- Equipped with infrared safe sets and
operating sets against mistake. controlled by PLC, that makes sure
safety.
- In the same container, all the processes
are finished. The shifting. charging and transferring are unnecessary.it
can optimize the flow of production and reduce cross pollution and
dust without materials layering. it is in conformity with the requirements
of GMP.
|
|
| |
|
|
|
MAIN TECHNICAL PAPAMETERS
|
|
|
|
|
|
|
| |
| Parameters\Type |
HZD-400 |
HZD-600 |
HZD-800 |
HZD-1000 |
HZD-1200 |
HZD-1500 |
HZD-1800 |
HZD-2000 |
| B |
1820 |
1930 |
2050 |
1970 |
2180 |
2180 |
2220 |
2350 |
| C |
2140 |
2570 |
2710 |
2760 |
2910 |
3050 |
3180 |
3420 |
| H |
2830 |
3100 |
3210 |
3350 |
3540 |
3560 |
3620 |
3850 |
| L |
2470 |
2940 |
2940 |
3310 |
3310 |
3500 |
3500 |
3500 |
| E |
350 |
250 |
350 |
440 |
520 |
550 |
500 |
600 |
| R |
2010 |
2370 |
2570 |
2620 |
2700 |
2710 |
2800 |
2900 |
| F |
1100 |
1440 |
1440 |
1440 |
1440 |
1550 |
1550 |
1550 |
| G |
420 |
520 |
520 |
520 |
520 |
580 |
580 |
580 |
| WEIGHT(T) |
1.8 |
2.5 |
2.8 |
3 |
3.2 |
3.7 |
4 |
4.2 |
| POWER(KW) |
4 |
5.5 |
5.5 |
5.5 |
5.5 |
7.5 |
7.5 |
7.5 |
|
